nealderidder
Sawhorse
R-2 construction, 2009 IBC. I've got shower pans that abut corridor walls and party walls (1/2 hr partitions) in a three story apartment building. The plans call for the assembly to be continuous all the way to the floor and an additional layer of 1/2" green board be added at the shower enclosure to overlap the shower pan flange and provide a flush surface for the shower walls (swanstone type stuff).You know where I'm going already... builder wants to know if there is a way to keep that assembly intact without the additional layer of 1/2" gyp. I'm sure this has been seen by many of you before, know of any clever way to keep assembly intact without the additional Gyp.? View attachment 1183
View attachment 1634
View attachment 1634
/monthly_2012_01/shower.jpg.efb8a4556abeda9ffad5b65da6fd3044.jpg
View attachment 1634
View attachment 1634
/monthly_2012_01/shower.jpg.efb8a4556abeda9ffad5b65da6fd3044.jpg