FM William Burns
REGISTERED
Anyone have a spread sheet for the Darcy formula for checking friction loss in piping carrying foam concentrate? I’ll check the other forum later!
Where is Haz
Where is Haz
-
Welcome to The Building Code Forum
Your premier resource for building code knowledge.
This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.
Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.
Ready to upgrade? Log in and upgrade now.
FOAM-WATER WET SYSTEMS
- Thread starter FM William Burns
- Start date
Re: FOAM-WATER WET SYSTEMS
sorry not an engineer does this help:
http://www.ajdesigner.com/phpdarcyweisb ... length.php
check this and scroll down and click on this "this spreadsheet"::::::
http://www.jmcampbell.com/february-2007
sorry not an engineer does this help:
http://www.ajdesigner.com/phpdarcyweisb ... length.php
check this and scroll down and click on this "this spreadsheet"::::::
http://www.jmcampbell.com/february-2007
Coug Dad
Platinum Member
Re: FOAM-WATER WET SYSTEMS
I do not know of a spreadsheet. I use the formulas and diagrams in NFPA 16. You could check with the foam manufacturer.
I do not know of a spreadsheet. I use the formulas and diagrams in NFPA 16. You could check with the foam manufacturer.
RJJ
Co-Founder
Re: FOAM-WATER WET SYSTEMS
Haz seems to have fallen off the earth! :roll:
I would contact the manufacturer for tech support! They have to have run some numbers on this before.
Haz seems to have fallen off the earth! :roll:
I would contact the manufacturer for tech support! They have to have run some numbers on this before.
FM William Burns
REGISTERED
Re: FOAM-WATER WET SYSTEMS
Thanks guys and thanks Cda for the links. I'll check out that calculator tomorrow. Haz helped me develop the water/sprinkler spread sheet and I'll shoot him a email.
CougDad,
That's what I was planning to do when the calc package comes in but I thought there might be a (for lack of better term) cheat sheet out there. I use one for water flows etc. for sprinkler calcs but the anit-freeze and foam requires use of DW and I need to brush up on that formula so I can verify the calcs don't have too much garbage in....... Thanks!
Thanks guys and thanks Cda for the links. I'll check out that calculator tomorrow. Haz helped me develop the water/sprinkler spread sheet and I'll shoot him a email.
CougDad,
That's what I was planning to do when the calc package comes in but I thought there might be a (for lack of better term) cheat sheet out there. I use one for water flows etc. for sprinkler calcs but the anit-freeze and foam requires use of DW and I need to brush up on that formula so I can verify the calcs don't have too much garbage in....... Thanks!
FM William Burns
REGISTERED
Re: FOAM-WATER WET SYSTEMS
Yea, thought I saw him on that show Pitmasters the other night on TLC
Yea, thought I saw him on that show Pitmasters the other night on TLC
FM William Burns
REGISTERED
Re: FOAM-WATER WET SYSTEMS
Just an update........... learned through very reliable resource that one only needs to verify calculations using the Darcy formula for the section of piping carrying the foam or concentration to the water piping.......... which was a great relief.
P.S. Thanks again Cda for the link, it lead me to additional calculators that will become very handy if I ever get a large foam carrying piping network.
Just an update........... learned through very reliable resource that one only needs to verify calculations using the Darcy formula for the section of piping carrying the foam or concentration to the water piping.......... which was a great relief.
P.S. Thanks again Cda for the link, it lead me to additional calculators that will become very handy if I ever get a large foam carrying piping network.