mychaelp
Member
Hope you are all doing well out there, we are still stuck at work as boss feels the health situation is overblown.
I ran into a situation where a contractor/client want to know specifically why and if required by code the Gypsum Board on a non-bearing interior stud wall must extend 6" above the T-Bar Ceiling.
For the life of me I cannot recall any reason other than facilitation of installing the T-Bar angles.
Am I missing something here?
any references to code or industry standards would be really helpful.
You'd think after 32 years doing this I'd know this, never had anyone want to do this before, other than T.I. with existing ceilings they don't want to cut.
Thanks everyone...
I ran into a situation where a contractor/client want to know specifically why and if required by code the Gypsum Board on a non-bearing interior stud wall must extend 6" above the T-Bar Ceiling.
For the life of me I cannot recall any reason other than facilitation of installing the T-Bar angles.
Am I missing something here?
any references to code or industry standards would be really helpful.
You'd think after 32 years doing this I'd know this, never had anyone want to do this before, other than T.I. with existing ceilings they don't want to cut.
Thanks everyone...