• Welcome to the new and improved Building Code Forum. We appreciate you being here and hope that you are getting the information that you need concerning all codes of the building trades. This is a free forum to the public due to the generosity of the Sawhorses, Corporate Supporters and Supporters who have upgraded their accounts. If you would like to have improved access to the forum please upgrade to Sawhorse by first logging in then clicking here: Upgrades

Have a coke

Mr. Inspector

SAWHORSE
Joined
Nov 28, 2009
Messages
4,097
Location
Poconos/eastern PA
Doing a final accessibility inspection at a Wawa. At first I was going to fail this vending machine because all of the buttons were too high. Then manager showed me these almost invisible buttons on the 2nd photo. You can hardly see them unless you get close and look for them but you can feel them and they are less then 48" above the floor. They do anything the other buttons do. Does this meet IBC chapter 11 and ANSI??


1.jpg above the floor
2.jpg
 
I would say yes... only I believe that the accessible use symbols should be in a contrasting color.

A117.1-2009
703.2.10 Finish and Contrast

Characters and their background shall have a non-glare finish. Characters shall contrast with their background, with either light characters on a dark background, or dark characters on a light background.
 
That section is under signs. I do not think I can call these controls signs. No more than a white light switch with on and off on it on a white wall. But it seems that their should be something in the code about it.

1617885352467.png
 
We have had similar conversations before

 
Top