• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

LP Installation

Marshal Chris

Silver Member
Joined
Oct 23, 2009
Messages
155
Location
Long Island, NY
Our office has conducted an inspection at a facility for a temporary installation of LP. The company has installed six 1,000 gallon tanks for heating and other things in the building under construction. In looking at table 6104.3, we couldn't truly determine whether the table quantities was an aggregate total or a per container amount.

Does anyone have some insight?
 
Chris which edition ifc are you under??


There is in the 2015

It says 2000 gallon aggregate not to exceed 2000. 6104.2

B6155900-7A62-41D5-AC95-98B8ACAAF73C.jpeg
 
Read footnote d it says aggregate

So looks like they need fifty feet to Building public way property lines
 
I don't believe this is a "consumer" sight. I consider a consumer site where they sell LP. This is a building under construction. So I read footnote d and 6104.2 but don't believe these apply. In fact, it appears as such that the aggregate amount only applies at consumer sites.
 
QUOTE="Marshal Chris, post: 173969, member: 116"]for some reason, I can't view the picture.[/QUOTE]

Did you see this::



3E040D65-C9A6-44A9-90FD-3B0FA8788E80.jpeg
 
Are the containers manifolded together or does each container have an individual 2 stage pressure regulator that feeds into the building? If it's manifolded, footnote "d" in Table 6104.3 (2015 IFC) dictates a 50 foot separation distance from the regulated exposures. And this is a consumer site.
 
  • Like
Reactions: cda
Back
Top