steveray
SAWHORSE
With these 2 sections, what is everyone requiring? Laying on the floor is "supported.".....If it is routed in the corner it is (or may not be) likely to be damaged. just saw one with about 20' not even fastened and it gave me pause.....Don't know if I can call it plumbing and say every 6' fastened, but maybe.... A little concerned that something or someone gets caught on it and yanks it across the room and breaks it....
M2203.1 General. Piping shall be installed in a manner to
avoid placing stresses on the piping, and to accommodate
expansion and contraction of the piping system.
M2203.2 Supply piping. Supply piping used in the installation
of oil burners and appliances shall be not smaller than 3/8-
inch (9 mm) pipe or 3/8-inch (9 mm) outside diameter tubing.
Copper tubing and fittings shall be a minimum of Type L.
M2203.1 General. Piping shall be installed in a manner to
avoid placing stresses on the piping, and to accommodate
expansion and contraction of the piping system.
M2203.2 Supply piping. Supply piping used in the installation
of oil burners and appliances shall be not smaller than 3/8-
inch (9 mm) pipe or 3/8-inch (9 mm) outside diameter tubing.
Copper tubing and fittings shall be a minimum of Type L.