• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Professional Drawings

jar546

jar546

CBO
Joined
Oct 16, 2009
Messages
12,938
Location
Not where I really want to be
This is considered commercial because it is a 3 or more unit apartment building. They plan on removing the existing deck and replacing it with a new deck and new stairs which will include "putting new 6x6 posts in 42" deep holes"Exactly how exactly am I suppose to figure this one out for plan review? I am very fortunate that we routinely get great, professional submissions like this.How many of you would just issue the permit?

View attachment 2066

View attachment 2066

/monthly_2014_06/572953f0d51b2_ScreenShot2014-06-02at8.41.06PM.jpg.83e46f3c7da11951c62360191b0d945b.jpg
 
i wold give him the crayons back, suggest graph paper with a straight edge and require enough detail so I could build it without having to guess a the sizes of the material. Then we could discuss the whole is a RDP required question
 
Brent could build that. Of course, here in California, engineers help out with stair construction.
 
I wish I were rich.

I would drive across the country and build that sumb1tch EXACTLY like that drawing.

At least you know it's a house, and not a cliff.

Brent.
 
MASSDRIVER said:
I wish I were rich.I would drive across the country and build that sumb1tch EXACTLY like that drawing.

At least you know it's a house, and not a cliff.

Brent.
Click to expand...
Wish for filthy rich and take a plane.
 
Msradell said:
That drawing wouldn't even be sufficient for a residential project to say nothing about a commercial one!
Click to expand...
There, I fixed it.
 
Last edited by a moderator:
They plan on removing the existing deck and replacing it with a new deck and new stairs
Click to expand...
In their mind it is a simple job. Replace what is existing with new materials no big deal what is all the fuss about drawings when you can go out and see what is there?

We run into this a couple times a year with various projects. We meet the people onsite explain what the minimum info would be on a drawing and the different views required.
 
It depends are fees charged differently for submission of professional drawings that spells out the details and calculations compared to the time an inspector to track down design errors who are normally not qualified to make such judgments with the crayon drawings?

And what are the guidelines for design professionals to submit elementary type drawings to cut costs for their services and put the extra demands on the inspection department?
 
MASSDRIVER said:
I would drive across the country and build that sumb1tch EXACTLY like that drawing.
Click to expand...
Your going to need the fastener details, don't know why Jeff didn't post them.

Here you go.

 
All that's needed for that drawing to be compliant is a note "Built to Code". Tada..... it's fixed. I'm sure the guy plans to overbuild it anyhow.

ZIG
 
You must log in or register to reply here.
Back
Top