Hyrax4978
Registered User
So I find myself in the initial phase of the first "spray room" that i have ever done. going through the IBC and IFC looking at sprinklers etc. 416.2.1 surfaces has me baffled.
Interior surface shall be smooth and shall be so constructed to permit the free passage of exhaust air from all parts of the interior... etc.
Can someone offer an example of an affordable wall option. Commentary states rough, corrugated and uneven are not an option.
So metal liner panels, masonry plywood etc are all out.
They paint large objects. the room is about 3,000 SF and will hold a few items trailered in to be painted.
Help is appreciated.
Thank you,
Interior surface shall be smooth and shall be so constructed to permit the free passage of exhaust air from all parts of the interior... etc.
Can someone offer an example of an affordable wall option. Commentary states rough, corrugated and uneven are not an option.
So metal liner panels, masonry plywood etc are all out.
They paint large objects. the room is about 3,000 SF and will hold a few items trailered in to be painted.
Help is appreciated.
Thank you,