So my question is in regards to 1011.8 Vertical Rise of stairs
So I know this section says that maximum height between landings is 12', so with this I have 21 risers a 6 219/256" each. With my floor assembly and using 10 ft ceilings my actual height is 12' - 1 1/8", I still have 21 risers at 6 221/256" each.
Is this going to be flagged in code review for 1/128" in riser height. it will take the same effort to go up 12' as it would 12' 1 1/8"
So I know this section says that maximum height between landings is 12', so with this I have 21 risers a 6 219/256" each. With my floor assembly and using 10 ft ceilings my actual height is 12' - 1 1/8", I still have 21 risers at 6 221/256" each.
Is this going to be flagged in code review for 1/128" in riser height. it will take the same effort to go up 12' as it would 12' 1 1/8"