Today's fun

[TheCommish]

Separation between duplexes, horizontal coreboard panels and post base installation

 

[Yankee Chronicler]

 

[steveray]

2hr common wall? No plumbing allowed? If the "facing" wall is part of the listing, that is a big problem too....

 

[TheCommish]

They are interesting, not bad rhythm walking on the up or doewm

 

[Joe.B]

Woah, what is that rise and run? 6" and 15" or something like that?

I think I remember a Tom Silva rule-of-thumb was two risers and one tread should equal 27-28 inches. Something like that anyways. Shorter risers need longer treads to still feel comfortable to walk on.

 

[TheCommish]

yes the ratio has been discus in the forum just recently

 

[ICE]

The good old days when mom went jogging with us.

 

[steveray]

They are interesting, not bad rhythm walking on the up or doewm

Probably safety glass at least at the first window...And I would take a close look at striger connections, but it doesn't look sketchy....

 

[TheCommish]

Todays submittal for intumescent paint

 

[steveray]

But it says it resists heat right on the can? What's the problem? Just tell me what you want....

 

[TheCommish]

Brought to you by my Inspector of Wires

 

[steveray]

Somebody has a 110.26 problem...and maybe a securing and supporting problem....And a raceways subject to ground movement...Which PV company?

 

[SCBO1]

Separation between duplexes, horizontal coreboard panels and post base installation

Let's see what the electrician does with the separation wall, blue plastic boxes I suspect will be installed and maybe the need for box extensions? Keep us posted!

Good topic for a thread!

Today's fun​

​

 

[TheCommish]

Somebody has a 110.26 problem...and maybe a securing and supporting problem....And a raceways subject to ground movement...Which PV company?

I am waiting for the permit application to build a bunch of platforms

 

[TheCommish]

For the electricians

Pipe straightening

 

[e hilton]

For the electricians

Pipe straightening

Reminds me if my father straightening nails he pulled out.

 

[Joe.B]

 

[TheCommish]

A simple deck, yes that is a 6 foot cantilever of the beam, 1/4 of the 24 foot span

 

[Paul Sweet]

It's not even a cantilever when at least one of the 2-bys isn't continuous over the column!

 

[steveray]

It's not even a cantilever when at least one of the 2-bys isn't continuous over the column!

Good catch, I didn't look at the zooms....And the Techno Metal posts are no good if they are >6" out of the ground unless you have specific engineering....That is IF you allow them at all without specific engineering...

 

[TheCommish]

Yes we,recognized the incorrect splice location, also not supported joints between beam sections.

This project is a real kerfuffle, unlicensed contractor threw application to homeowners to pull, told homeowners everything was all set. we requested additional information, when following up at 30 days found out deck was constructed. Tell msy staff we said it was "all set" 2 words we never use.

Told my staff he was a buddy of mine (I have no buddies), an I would be OK with the submittal as is, not true. And on it goes

 

[ICE]

I have no buddies

I’ll be a friend.

 

[TheCommish]

Thanks. Ice