Sometimes I wonder how I can keep a straight face when I am presented with things like this. And the contractor was there to meet me. This is all the proof I need that a license is easy to get.

Your premier resource for building code knowledge.
This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.
Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.
Ready to upgrade? Log in and upgrade now.
I thought that that might be the case because you mentioned the ground. I didn't know what polaris type meant so now I've learned something today. I mentioned service entrance conductors because of the size you gave for the conductors.codeworks said:ok iceman, they are feeders, not service entrance conductors. they run from the disconnect outside adjacent the meter to a MLO panel in the building. I dont recall the conductior size off the top of my head, but they would have been yugly in the panel, taken up too much space, contractor wanted to use polaris type, i suggested butt splice with cold shrink, he liked polaris, so the splices are in j box out side the tenant space, which is all part of the original pipe run install for power to this little establishment.
ICE said:The Home Depot crew and you aren't really roofers.![]()
Tell 'em they can leave it on, but they have to increase the roof pitch to 2/12 and install a second layer of underlayment.ICE said:"The plywood was in great condition so we got a head start. You aren't going to make us tear it off are you? How about if we open up a small area so that you can see some plywood?"![]()
Not by me. Most have gotten all of the money long before I show up. They leave obvious things out and then make it an extra to fix their violations. I have had owners cringe when I come back to inspect corrections because they don't want to pay the contractor to show up yet again.gbhammer said:Do contractors ever get paid in your area?
When we have to return to fix something, whether found by me or the inspector, it is done at no charge to the customer. I thought that was the way it was supposed to be.ICE said:Not by me. Most have gotten all of the money long before I show up. They leave obvious things out and then make it an extra to fix their violations. I have had owners cringe when I come back to inspect corrections because they don't want to pay the contractor to show up yet again.
It goes both ways. There are plumbers out there that will not install anything that's not on the original water heater. If there is no T&P drain pipe on the existing W/H, then they leave it off the new one. When I write it up, it becomes an extra. Smitty pans are a favorite because that's a lot of work. Many times I have a H/O that asks me if it was proper for the contractor to charge them to do the corrections. I want to say, "Well somebody has to pay for his education."fireguy said:When we have to return to fix something, whether found by me or the inspector, it is done at no charge to the customer. I thought that was the way it was supposed to be.