• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

An average day

ICE,I'm concerned that nothing in your area ever gets reviewed?
So "review" you say.....not in this lifetime.
 
Last edited by a moderator:
Ice, saw an article in the paper about two guys who were arrested in So Cal for drawing illegal house plans for a couple of years. Any of that in your area?
 
There's nothing much that I can do about it. Our policy is to through a bunch of paperwork on it. Then we secure a lien on the property for around $1200. Then we do nothing.....usually. In this case the code enforcement dept has sent this for prosecution. That is extremely rare.

As far as kicking the people out....that's not going to happen. Where would we kick them to? The streets?
Really? No offense meant, but you need better bosses. Tell them I said that if you like..

What could/do you lien it for, and how does that work?

IMO, letting people stay there is worse than kicking them out. If they end up sleeping in their car, at least they'll be alive when that place burns down.
 
I had to investigate a complaint today. I don't like doing that. The complainer said that the garage has been converted and is a rental unit. As it turned out, the entire 1300 sqft dwelling has been chopped up. There are ten tenants. And a lot of doors.

There's the proud owner and a cardboard partition wall.



There's a person living in there. He said that he pays $550 per month. I spoke to two other people and they said that they pay $550 per month. This was before the owner showed up. Each of the tenants is mentally challenged. They are probably all on some form of government assistance.



He claimed that nobody lives in this hole.



I was surprised that there isn't a vacancy sign out front.

Any adult protective service or mhmr that will investigate???
 
Any adult protective service or mhmr that will investigate???
Since this has gone to the district attorney's office, if that's a possibility I'm sure that they are looking at it.
 
The contractor brought the GEC from the back of the house to the front.

24320567553_774fa0bbcc_o.jpg

He managed to miss the water main.

24651909870_62e7a4f5e7_b.jpg
 
Last edited:
On this job the GEC starts here.

24947437845_55a3962aae_b.jpg

It hits a rod and then on to the water main at the front of the house.

24651955550_313451c1a5_b.jpg

And here we are at the water main.

24316859114_85ee758d3e_b.jpg
 
Last edited:
He said, "It wouldn't fit because the enclosure is too small" I said, "Well you understand this completely so why should I write a correction".

24967162475_0ed676685f_b.jpg
 
Last edited:
ICE, You put your left foot in and take your left foot out and shake all around! That's how you do the ICE-a-Pokie!

"Put your Wolverines back on!"
 
At the first inspection of the wall furnace the stud bay had not been opened up. When I told the contractor that the wall finish had to be removed he wanted to know why. One of the things that I mentioned was the plate spacer strap.

24937911582_7646d2ca00_b.jpg

And this is a single story house.

Is he right and it's my fault that he has to do more work and lose another day waiting for yet another inspection? But Sir, I had no idea that you had no clue.

24425372384_596b00d341_b.jpg
 
Last edited:
ICE, Flue appears to be installed to code now with the plate spacer! An no sheet metal screws through the plumbers strap is a good thing.
 
The contractor must be a real jerk. The lady that lives there was tickled to find out that he will have to do the lath over.

24709067509_d22381fc1b_b.jpg
 
Last edited:
As soon as I saw this I told them that a dielectric union is required.

25050346946_18b3b6bf50_b.jpg

They removed dielectric unions and installed these which they claim are bronze. They cost $11 each.

Here is what they removed.

24781097310_227840f3fd_b.jpg
 
Last edited:
24749069389_de906571b9_b.jpg

24486110364_6c82b380ba_b.jpg

There are valves behind this access door for the hot and cold water. The gas shutoff is behind the appliances. I screwed up and told them to make the gas shutoff valve accessible without moving the appliances. I'll have to call them tomorrow and take that back. The no combustion air is still a problem and as I recall, a laundry room is required to have an exhaust fan.....or maybe not. Either way that won't happen.

24486139024_53e49cf2aa_b.jpg Well I thought about it some more and haven't made up my mind about the gas valve. The only way to make it accessible is an access panel in the exterior wall behind the dryer. The reason that I figured that I screwed up is that the gas valve is always accessible behind a dryer. All you have to do is move the dryer and there it is. Now how would that work with this setup. The connector would have to be 12' long to pull the stack out and get behind it. If just the dryer came out and then the washer it would have to be even longer. There used to be a code about a connector being limited to 3'.

I haven't called them yet and I was hoping to get feedback here.
 
Last edited:
Everywhere you look there's a blob of foam.

24748974509_54298f959e_b.jpg

I could see the nail shank behind the blob that was here. So now I am going to ask them to remove all of the foam so I can look for more nails. There plenty of shiners and it is strange that the sheathing was nailed after the electrical was done.

I changed up the correction. It is now "Start over and leave the existing cable in place".

25090333686_6e5ae79d06_b.jpg

There is a service upgrade located on the addition and this is the old location. This mess is energized and the service has been connected by Edison. The service has been signed off on the job card.

25090350856_d2588dbbd7_b.jpg

The rods are just over 4" apart.

25145804276_ebe04645bb_b.jpg
 
Last edited:
Back
Top